A friend of mine used a 3D printing service to make a resin-based resin mold for his latest movie, The Lego Movie.

The mold has a few different features, including a movable head, a camera and a 3-D printer that prints out the movie’s final product.

If you’re not familiar with 3D printers, they’re often used to make parts for mobile apps, such as Lego games, but the resin mold is unique.

You can also print your own 3D models with this mold.

However, you’ll need to use some pretty expensive tools to make this mold, and it costs $20.

We have to admit, it’s kind of awesome.

Read more about the mold below.

First, you need to get a 3DS XL.

The model is made with ABS plastic, which is the material used to build Lego bricks.

ABS is also called plastic because it’s made out of carbon.

That’s why you’ll see it listed as “ABS” on 3DSXL.

3D Systems also makes a resin that is also ABS.

You will also need to print out the model.

We went ahead and printed the mold out and then took it home.

Here’s how we made it, using the 3DS Max print function:1.

Open up the 3ds max program, which comes with the program for the printer.2.

Click the Print button in the bottom right corner.3.

Select 3ds Max.4.

Enter the desired size for your mold.

You’ll need the mold to be about 1/4 inch thick.

We measured it to be 1/2 inch thick and made sure it was as flat as possible.5.

You may want to take a peek at the image below for a better idea of what the mold looks like.6.

Click on the 3D render tab, which will open up the mesh.

You should see a few small details, such a tiny hole in the mold’s bottom, which has to be made out with the resin.7.

Add the resin to the model, making sure the part you want to print is visible on the part.

You want to make sure it’s aligned with the mold, so the part is aligned with where the resin is supposed to be.8.

Click OK.

The resin will now start printing.

When it’s done printing, click the print button and the part should come out.

This is the resin model we printed out.

If the part isn’t aligned with our mold, it may or may not print correctly.

If it does print correctly, you can remove the part from the mold and re-print the part on the resin using the same tool.9.

Now, if you want, you could remove the resin and try it out in a different mold, but that would require an extra tool.

To print the part in the new mold, you will need to cut out the part, cut the pieces off of the mold as close to each other as possible, and print the parts out from the bottom up.

You don’t want the parts to be too close together.

Once you’ve printed the parts, you should be able to take them out of the resin, flip the parts over, and check to make the parts fit properly.10.

Make sure the parts are aligned correctly by looking at the printed part.

Then, you’re ready to put the parts together.

The parts are printed from the top down and you can adjust the height of the parts as needed.

If everything is printing correctly, the mold should now look like this:Congratulations!

You’ve printed a 3ds model!

You’re ready for your next movie!